In this post I will try to discuss about why the computer failed to get into Windows.
When a new computer is on and not want to get into windows with writing error or just display blue screen, can be caused by many things, among others:
1. There is a file in the Windows operating system that was accidentally deleted
2. No viruses, spyware or trojans that come 'loading' when computer startup
3. There is a file (driver) is broken is broken, and when it is read by Windows fails
4. There is damage to the hardware, especially in the computer's memory or hard drive
5. Windows operating system installed is damaged or unfinished
6. There is a setting in the BIOS-settings incorrectly modified or new
Here is the solution to deal with the problems above you can do .
1 . Startup using ' safe' mode ( press F8 or F5 when computers were first want to get into Windows , then select ' safe mode ' ) . If it made it into Windows computers means there ' loading ' which can not be read by Windows correctly . Turn off the ' loading ' it by using the command ' msconfig ' in the startup ( called out in start > run > msconfig )
2 . If the computer can not get into Windows , the easiest way is repair Windows . The trick is to insert the Windows installation CD , and change the BIOS to startup via CD / DVD - ROM , after installation go to the install of Windows , the Windows repair option choice . You can re-install Windows to a new folder or reformat the hard drive if it fails to repair Windows .
3 . Make sure that you do not change the BIOS settings before, if there is you should restore it to normal , you should not forget to select the option ' Loading BIOS defaults ' .
4 . If the above steps fail all , there may be damage to the hardware . Damage is generally located on the memory and hard drive . VGA and mainboard may also be damaged , but the probability is very small .
5 . Damage to the VGA card drivers can also cause Windows can not enter . If that happens , you have to startup in mode ' safe mode ' and then uninstall corrupted VGA driver first, and re-install new VGA driver is correct when entered into Windows normally .
That's the first steps you can take to overcome errors profit either when entering the windows blue screen or the other . If you still have trouble you can do is reinstall windows or take it to a handyman service .
Hopefully Helpful ...